Skip to main content

The Importance of Diffusion

by Anthony Grimani

“Um, what’s diffusion, and why do I need it?” is the question from my client. Slowly, I take a breath, count to ten, and consider my options. First, I could scream, stomp around the room, and pull out my hair. Second, I could suddenly remember that I’m terribly late for another meeting (which is probably true) and beg to be excused. Third, I could remain calmly in my seat, smile, and politely explain the answer. Considering the nature of this client and his job, it looks like it’s option number three.

Here’s the sad thing. You might think that this client is a novice end user – the type whose digital clocks all blink 12:00. But he or she could just as easily be a custom integrator! I see it all the time: People who design home theaters for a living don’t know what diffusion is or why they need it. What’s particularly frustrating is that I have spent many hours over that past two decades doing my best to educate them.

So let’s make this real. Do you know why diffusion is important in home theaters? 

Small Room Acoustics 101
I’m going to assume you know a little about room acoustics. After sound leaves the speakers, some of it goes directly to your ears, and a lot of it reflects off the walls before going to your ears (Figure 1). 
 

It is this reflected sound that can cause problems if it’s not tamed. I’m also going to assume that you know about absorption – that it’s an effective way to treat problematic reflections. You put an absorber on the wall where a strong reflection occurs, as in the case where a speaker or listener is really close to the wall (Figure 2). Hopefully, you know, too, that acoustically treating a room is not as simple as putting absorption everywhere. If only it were that easy.
Every room has a specific balance of direct to reflected sound that will make the room feel
natural to listeners. You need some absorption, yes, but also some reflections. Typically, you
should only cover about 25% of wall surfaces with absorption. Exceed that amount and the
room will start to sound too dead. 25% absorption means that 75% of the wall surfaces will still be hard, leading to reflections that could cause errors in sound clarity. You can simply break up these reflections with diffusers (Figure 3). They generate uncorrelated and random acoustic energy that sounds more like the pleasant reverberation of a concert hall and less like the annoying hard reflections you often hear in small rooms. The right balance of absorption, reflection, and diffusion results in a more pleasing sound field, with better envelopment, better imaging, and a wider sweet spot.
All Things Wild and Scary
If you have your thinking cap on, you may have realized why diffusers are very often weird and bizarre shapes. Their purpose is to create as many uncorrelated reflections as possible. The most efficient way to accomplish this is a “panel” with wildly undulating surfaces. Believe it or not, there are actually many different kinds of diffusers, officially categorized according to the scientific way in which they scatter sound. However, for your purposes in designing a home theater, you need to be familiar with two major types: those that scatter sound in a two-dimensional plane, and those that scatter sound in a three-dimensional hemisphere (Figures 4 & 5). It’s not always easy to tell just by looking at a diffuser which type it is, but here’s a clue. If it is cylindrical, or it appears to have lots of long and skinny slots or wells, it’s probably two-dimensional. If it is really crazy, with totally random-looking surfaces, it’s probably three-dimensional.Like with absorbers, a diffuser’s depth affects the bandwidth over which it scatters sound. Deeper is better. Six inches is ideal; four inches is OK; two inches is almost not worth the effort.

A Word on Placement
While it is possible to use the two types of diffusers interchangeably (after all, they both create lots of uncorrelated reflections), you’ll get better results if you use two-dimensional units on the left and right walls toward the front of the room and three-dimensional units toward the back. It’s also a good idea to mix absorption and diffusion together in all parts of the room. That being said, you’ll probably want to weight the average so that there is a bit more absorption in the front and more diffusion in the back.

One common argument against proper diffuser placement (or using them at all) is aesthetics. The things aren’t pretty, unless you have an uncommon take on what looks attractive. So, cover them with a stretched fabric wall, or use diffusers that are already covered with fabric! My company does one or the other all the time – we even manufacture some fabric-covered diffusers that we sell at very good prices – and we have lots of really, really happy clients. It is possible. 

Diffusers or Confusers?
A friend and colleague of mine, Floyd Toole, makes a very good point about diffusers, and it should serve as a caution to all of us. You can load a room with so many diffusers that it becomes a wash of random acoustic energy that confuses imaging. This is not what you want at all, but it is avoidable. Just don’t get too heavy-handed with the diffusers. It’s the same concept as too much absorption, except with a different acoustic result. Too much of a good thing is a bad thing. 

Application Time
For those of you who may be wondering, the anecdote at the top of this column is not an actual event. However, it is indicative of the way many people think or feel about diffusers. Hopefully, you now understand what they do and why they’re so important. Take this message to heart, and design your room accordingly.

*  *  *
This article is based on a column published by A. Grimani in Residential Systems magazine November 2007. Chase Walton contributed to this article.

Comments

Post a Comment

Popular posts from this blog

PMI and Audio Images Sweep CEDIA's 2013 Electronic Lifestyle Awards

PMI and integrator Audio Images won five of the top awards for Home Theater Technical Design excellence at this year’s CEDIA Electronic Lifestyles® Awards, more than any other company in this year’s Home Theater category! Winning the Best Overall Home Theater and a Gold Technical Design award (in the $1M & up category) was an opulent theater that is part of a drop-dead gorgeous entertainment wing of an extravagant estate in Irvine, California. In addition to a state-of-the-art home theater, the entertainment wing includes a pizzeria, nightclub, and vintage arcade. A monumental project like this needed an equally monumental team which included TK Theaters (designer) and SH Acoustics (engineering design). This project was also featured on HGTV’s “Million Dollar Rooms” where Theo Kalomirakis gave a personal tour of this amazing space. Click to read the full story on this project.  Click here to see the HGTV video. Winning a Gold Technical Design award (in the $251-350k

Fun Room Details

In Deep Thank you for reading the high level article, now we will go into a detailed explanation of this project. This blog expands on the details from the " Home Theater Has Come Out of the Cave " article. The integration firm responsible for building this masterpiece is  Audio Images  of Tustin California. Our designs and engineering is only as good as the implementation and AudioImages came through on every detail. The Room Shell The physical issues that needed to be dealt with to accomplish these goals dictated a few design solutions: Sound Isolation The room had to be decoupled from the Great Room that is located directly above it. This prevents the sound leakage from disturbing the adults. Decoupling loosely means to build resilient wall and floor-ceiling structures with little to no connections to the house’s framing structures. The purpose is to limit every contact point that could mechanically transfer sound energy and interfere with daily use

THE GRIMANI FILES: Bringing Life to a Comatose Home Theater

This client was referred to us by the integrator, who completed this installation about 10 years ago. The room was a dedicated three-row home theater in an upscale neighborhood of Detroit. All the gear was state-of-the-art for its time - from the studio-grade speakers, to the professional HD video projection system. But the surround decoder finally gave up the ghost after several years of faithful service. The client heard that Dolby Atmos® was the latest thing, so he sourced a new processor. He expected it to be an automatic upgrade, but wasn’t aware that he also needed to add speakers for the Top and Wide locations. At any rate, it was time to install, configure, and tune the system for the new processor. I took the job and carved out two days - right before Christmas - for a quick jaunt from my temperate San Francisco Bay Area home to frigid Detroit. (Who doesn't like a little cold for the holidays?) While planning the trip, I found out that the system didn’t include any

Performance Media Industries, Ltd.

61 Galli Drive, Suite B. Novato, CA 94949, USA
[T] (415) 883-1476
[F] (415) 883-8147